Stealth Vertex Metal Detector
The Stealth Vertex Metal Detector is a compact inspection unit designed for free-fall product streams in food processing lines. It is typically installed in factories and packaging operations across the UAE and wider GCC region, positioned between a multihead weigher and a vertical form fill seal system. The unit supports contamination control where space is limited and gravity-fed flow is required. It operates within high-speed packaging environments and is suited for continuous product drop applications with stable flow rates and controlled chute dimensions used across Middle East and MEA facilities.
In UAE production plants around Dubai and Sharjah, the system is installed directly below the multihead weigher and above the bagger. A remote-mounted control unit allows operators to manage settings without accessing confined spaces. Typical operating limits are defined by chute diameter, product density, and drop height rather than belt speed. The detector interfaces with reject relays to stop bag sealing or divert product when contamination is identified.
The construction supports hygienic operation and consistent performance in dry and semi-dry environments. Data capture functions allow inspection events to be logged for quality review. In UAE food operations, the Stealth Vertex Metal Detector is often treated as a critical inspection point within documented food safety and verification routines.
Halo Automatic Testing System for Metal Detectors
Halo is suitable for any Fortress metal detector; ideally added at the point of manufacture, it can however, be added to some existing systems.
BROCHURE
- Saves Time and Money
- Automatic, Accurate and Consistent Testing at Programmable Intervals
- Decreases Frequency of Manual Testing
- Reproduces Ferrous, Non-Ferrous and Stainless Steel metal sample signal
- Detector Testing at a button push
- Test speed with Halo set to match belt speed in conveyor applications
- Front, Middle, and Back of Product Testing with Conveyor Applications
- Externally Operated System
- Multiple Custom Test Levels
- Eliminates Workplace Safety Risks
- Reduces Machine Downtime/Testing Time
- Negates Human Error
- System Set-Up in Minutes
- Tamper Proof
- Detailed Data Collection and Reports with Contact Reporter Software are Compliant with HACCP & GFSI Requirements
Key Features
- Designed specifically for free-fall product inspection
- Ultra-slim detector body for confined installation spaces
- Remote-mounted control interface for easier access
- Digital signal processing for stable detection performance
- Detection of ferrous, non-ferrous, and stainless steel
- Automatic calibration during product setup
- Reject relay output for integration with baggers
- Data collection via Contact Reporter software
- Compatible with Halo automatic testing system
Stealth Vertex Metal Detector
Brochure | Quotation | Availability
Fill the form with valid details to receive the information.
Frequently Asked Questions
In UAE facilities, the Stealth Vertex Metal Detector is usually installed between a multihead weigher and a vertical form fill seal machine. In factories around Dubai and Sharjah, this placement allows inspection of free-falling products without extending conveyor length, which is useful in compact packaging halls and warehouse-linked production areas.
The system is commonly used for snack foods, grains, powders, nuts, and similar materials that move consistently under gravity. UAE processors handling dry or semi-dry products prefer this setup because it avoids belt contact and supports stable inspection in high-speed bagging environments.
When metal is detected, the unit sends a signal through a reject relay. In most UAE installations, this stops bag sealing or diverts the affected product portion, preventing contaminated packs from being completed and reducing downstream handling issues.
Yes, provided the product flow is stable. Throughput is governed by drop speed, chute diameter, and product density rather than belt speed. Many GCC facilities operate the detector reliably at the same rates as their multihead weighers.
Routine checks usually include scheduled test routines, inspection of the chute area, and verification of reject signals. In UAE plants, quality teams often include these checks in HACCP verification schedules rather than performing manual tests during every shift.
We Supply To
Product Tags
Customer Testimonials
GET A QUOTE
Tell us about your business requirement, one of our technical expert will be in touch with you soon..!
NEW PRODUCTS ALERTS
