Bottle/Jar Blow Molding Machine
The Bottle/Jar Blow Molding Machine is an industrial forming system used to manufacture plastic bottles and jars directly from preforms within controlled production environments. Commonly installed in factories and packaging facilities across the UAE and wider GCC region, it supports in-house container production to reduce dependency on external suppliers. The machine delivers an output range of 1,800–2,000 bottles per hour (500 ml) and accommodates container heights up to 310 mm, making it suitable for mid-volume packaging operations across MEA markets.
Within UAE production facilities in Dubai and Sharjah, the system integrates smoothly with downstream filling, labeling, and packing lines. The machine supports bottle body diameters from 20 to 100 mm and neck sizes between 15 and 38 mm, enabling flexible format changes without major mechanical intervention.
Operating with two mold cavities, the system balances throughput and energy efficiency while maintaining repeatable forming accuracy. The enclosed structure supports safer operation in temperature-controlled factory floors, while its compatibility with centralized air and cooling systems aligns with common UAE industrial utilities. For manufacturers supplying the GCC, Middle East, and Africa, this machine provides predictable output and controlled container quality under continuous shift conditions.
Technical Specifications
| Product Code | APF-GA2 |
| Productivity | 1800-2000 bottles/hr(500ml) |
| Body diameter | 20-100mm |
| Height | 50-310mm |
| Neck diameter | 15-38mm |
| Cavity | 2cavities |
| Mold thick | 240mm |
| Mold | 260*240*370mm |
| Electrical source power | 380v 3Phase /220v 3Phase |
| Rated Power | 25kw |
| Really use power | 6.5kw |
| LP air compressor | 1.0m3/min 1.0MPa 1set (15KW) |
| HP air compressor | 0.7m3/min 3.0MPa 2sets |
| Air dryer | 1.0m3/min 3.0MPa 1set |
| Cooling water | 15L/min |
| Dimension (L*W*H) | 1900*1280*1930mm |
| Weight | 2200kg |
| Auxiliary equipment (L*W*H) | 2000*950*2480mm |
| Auxiliary equipment Weight | 250kg |
Key Features
- Two-cavity blow molding configuration for stable hourly output
- Supports bottle heights from 50 to 310 mm
- Handles body diameters between 20 and 100 mm
- Compatible with neck diameters from 15 to 38 mm
- Designed for PET bottle and jar forming applications
- Operates with integrated high-pressure and low-pressure air systems
- Structured enclosure for controlled forming conditions
- Adaptable mold dimensions for product format variation
Bottle/Jar Blow Molding Machine
Brochure | Quotation | Availability
Fill the form with valid details to receive the information.
Product Videos
Frequently Asked Questions
The Bottle/Jar Blow Molding Machine is designed for PET containers used in beverages, food oils, and household liquids. It supports body diameters from 20–100 mm and heights up to 310 mm. In UAE factories around Dubai and Sharjah, it is commonly used for standard water, juice, and chemical bottles produced from preforms.
The machine is built for stable multi-shift production, which is common in UAE manufacturing zones. With a capacity of roughly 1,800–2,000 bottles per hour (500 ml), it maintains consistent forming accuracy when supported by proper air supply, cooling water, and routine inspection during extended operating hours.
Installation typically requires a stable power source, high-pressure and low-pressure air compressors, cooling water supply, and sufficient floor clearance. In industrial warehouses and factories across the UAE, these utilities are usually centralized, allowing the machine to integrate smoothly without major facility modification.
Yes, the machine is designed to feed directly into downstream filling, capping, and labeling systems. In UAE packaging lines, it is often positioned upstream of liquid filling machines, allowing manufacturers to control container quality internally before moving to labeling and secondary packaging stages.
Daily checks include mold surface inspection, air pressure stability, and cooling flow monitoring. Weekly tasks usually involve heater and clamp system checks. In GCC production environments, preventive maintenance is critical to avoid unplanned downtime caused by heat, dust, or compressed air inconsistencies.
Customer Testimonials
GET A QUOTE
Tell us about your business requirement, one of our technical expert will be in touch with you soon..!
NEW PRODUCTS ALERTS
