Multilines Stick Packaging Machine

The Multilines Stick Packaging Machine is a vertical form-fill-seal system designed for high-output stick and sachet packing of granules, powders, liquids, and pastes. It is widely used in UAE manufacturing plants, contract packing units, and export-oriented production facilities serving the GCC and MEA region. The machine supports compact installation while delivering multi-lane production efficiency. Typical configurations operate with 4 to 12 lanes and handle fill volumes ranging from 1 to 200 ml, depending on dosing system and product type.



ATCOPACK’s Multilines Stick Packaging Machine is built for applications where high throughput and precise dosing are required within limited floor space. The system forms stick packs or sachets using heat-sealable laminated films, producing 3-side seal, 4-side seal, or pillow-type formats. Product dosing is handled through modular filling units such as auger fillers for powders, cup or vibration systems for granules, and piston or pump-based fillers for liquids and pastes.

The machine is typically installed in climate-controlled production areas and integrates easily with upstream product feeding systems and downstream inspection or cartoning equipment. Independent lane operation ensures consistent pack quality while maintaining stable output across all lanes. Bag dimensions usually range between 50–140 mm in length and 16–35 mm in width, with film roll diameters up to 350 mm.

In UAE production zones such as Dubai and Sharjah, these machines are commonly used for food ingredients, beverage additives, and single-serve products where uniform dosing and reliable sealing are critical for export and retail distribution.

Technical Specifications


Product Code ALPM-X4L ALPM-X6L ALPM-X8L ALPM-X10L ALPM-X12L
Number of lanes 4-lanes 6-lanes 8-lanes 10-lanes 12-lanes
Packaging style Stick pack
Production Capacity (bags/min) Max. 50 bags/min per lane (Total speed up to 500 BPM )
Bag length (mm) 50-140
Bag width (mm) 16-35
Volume per bag (ml) 1-20
Packaging film Type heat sealable laminated film
Film roll outer diameter (mm) Max. 350
Film roll inner diameter (mm) 70-75

Key Features


  • Vertical form-fill-seal design for stick and sachet packaging
  • Multi-lane configurations available from 4 to 12 lanes
  • Compatible with granule, powder, liquid, and paste dosing systems
  • Independent lane sealing for consistent pack formation
  • Photocell-based bag length control for accurate cutting
  • Heat sealing with PID temperature regulation
  • Compact footprint suitable for high-density production floors
  • Optional coding and printing devices for traceability

Options:


  • Stainless steel SUS304 machine body
  • Static electricity eliminator
  • Tear notch device
  • Coding device (ribbon/thermal transfer)
Multilines Stick Packaging Machine
Brochure | Quotation | Availability

Fill the form with valid details to receive the information.

7 + 10 =

Product Videos


Frequently Asked Questions


In the UAE, these machines are widely used for packaging powdered beverages, sugar, salt, spices, liquid additives, and paste-based products. Manufacturing units in Dubai and Sharjah prefer multilines systems for single-serve formats where consistent dosing and sealed stick packs are required for retail and export markets.

Multi-lane operation allows several stick packs to be produced simultaneously within one machine cycle. UAE factories use this setup to increase output without expanding floor space, making it suitable for high-density production environments serving GCC and Africa-focused distribution.

Lane selection depends on target output, available space, and product flow characteristics. In UAE operations, 6 to 10 lane machines are common, balancing throughput requirements with ease of maintenance and manageable operator supervision.

The machine is typically positioned after bulk feeding or mixing systems and before secondary packing or cartoning. In Abu Dhabi production facilities, it often connects directly to conveyors or collection tables to support smooth workflow and reduced manual handling.

Daily cleaning of sealing jaws and dosing paths is essential to avoid residue buildup. UAE plants also perform weekly checks on film tracking, temperature stability, and sensor alignment to maintain consistent sealing quality during continuous operation.

We Supply To


Abu Dhabi Sharjah Ajman Fujairah Ras al Khaimah Umm al Quwain Al Ain Dubai Dammam Al Ahsa Jubail Al Qatif Riyadh Jeddah Sohar Dhahran Salalah Ibri Sur Nizwa Muscat Kuwait Qatar Bahrain Egypt Jordan Lebanon Mali Maldives Mauritius Barka
& more..!

Product Tags


Food PackagingStick PackagingGranules PackagingLiquid Products Packaging

Customer Testimonials

GET A QUOTE


Tell us about your business requirement, one of our technical expert will be in touch with you soon..!

PROCEED

NEW PRODUCTS ALERTS


Intralogistics
Food Packaging
Commercial Kitchen