Semi Automatic Sleeve Seal Shrink + Tunnel

The Semi Automatic Sleeve Seal Shrink Tunnel is a packaging system used to bundle products with PE shrink film before heat shrinking. It is commonly installed in warehouses, factories, and distribution units handling grouped cartons, trays, or multipacks. The system supports controlled sleeve sealing followed by uniform heat application through the tunnel. Typical operating output ranges around 8–10 packs per minute, with support for large pack dimensions and variable product lengths. This solution is widely used across the UAE, GCC, and MEA for stable secondary packaging.



The Semi Automatic Sleeve Seal Shrink + Tunnel performs two coordinated functions: sleeve sealing and controlled heat shrinking. Products are manually or semi-automatically positioned, wrapped with PE film, and sealed to form a sleeve. The sealed pack then transfers into the shrink tunnel, where regulated airflow and temperature ensure even film contraction around the load.

In UAE production facilities across Dubai and Sharjah, this system is commonly used for bundling cartons, bottled goods, and industrial packs prior to palletizing. The sleeve sealer supports wide film widths up to approximately 600 mm, allowing flexible grouping of products without length restriction. The tunnel accommodates large pack sizes, making it suitable for varied SKUs.

The machine integrates well into existing packing lines after cartoning or case packing. Its mechanical layout allows straightforward operator access, steady product flow, and consistent sealing performance. Adjustable sealing time, tunnel temperature, and conveyor speed enable operators to fine-tune results based on film thickness and product mass. The construction supports continuous use in demanding warehouse and logistics environments across the UAE.

Technical Specifications


Product code ABSF-6540XLT
Tunnel Size 1500*600*400mm
Max. Packing Size (L*W*H) 520* 320* 350mm
Capacity 8-10 bags/min
Voltage 380V 50HZ 3P or 220V 60HZ 3P
Power 18.5KW
Air Consumption 60L t/min
Pressure 6 bar
Cutter Length 650mm
Sealing Time 1.5-3s
Temperature 150-250℃
Film Thickness 40-80μm
Max. Film Width 600mm
Film Used PE
External Dimensions 3500*860*2000mm
Packaging Size 3600*960*1350
Net Weight 520kg

Key Features


  • Semi-automatic sleeve sealing system for grouped packaging
  • Integrated shrink tunnel with controlled hot air circulation
  • Supports PE shrink film within standard industrial thickness ranges
  • Adjustable tunnel temperature and conveyor speed settings
  • Handles large pack sizes and variable product lengths
  • Stable mechanical frame suited for warehouse operations
  • Manual or assisted feeding depending on workflow layout
  • Consistent sealing and shrinking for uniform pack appearance
Semi Automatic Sleeve Seal Shrink + Tunnel
Brochure | Quotation | Availability

Fill the form with valid details to receive the information.

2 + 2 =

Frequently Asked Questions


In UAE operations, this machine is widely used for bundling cartons, bottled products, cans, trays, and grouped consumer goods. Warehouses and factories in Dubai and Sharjah often apply it for secondary packaging before palletizing, especially where product sizes vary and full automation is not required.

The machine is typically installed after primary packing or case forming stations. In UAE logistics environments, it works well with manual or semi-automatic feeding. The sealed packs move directly into the shrink tunnel, allowing smooth integration without major conveyor or layout changes.

Under normal conditions, operators usually achieve around 8–10 packs per minute. Actual output depends on product dimensions, operator handling speed, and film thickness. This range suits medium-volume UAE warehouses where consistency and flexibility are prioritized over maximum automation.

Operators should monitor tunnel temperature, ensure airflow remains unobstructed, and keep protective covers in place. In UAE industrial settings, routine checks of emergency stops, insulation panels, and conveyor alignment help reduce heat-related risks during extended operating hours.

Regular cleaning of sealing blades, inspection of heating elements, and lubrication of conveyor components are essential. UAE facilities often schedule weekly visual checks and monthly electrical inspections to maintain stable sealing quality in warm GCC operating environments.

We Supply To


Abu Dhabi Sharjah Ajman Fujairah Ras al Khaimah Umm al Quwain Al Ain Dubai Dammam Al Ahsa Jubail Al Qatif Riyadh Jeddah Sohar Dhahran Salalah Ibri Sur Nizwa Muscat Kuwait Qatar Bahrain Egypt Jordan Lebanon Mali Maldives Mauritius Barka
& more..!

Customer Testimonials

GET A QUOTE


Tell us about your business requirement, one of our technical expert will be in touch with you soon..!

PROCEED

NEW PRODUCTS ALERTS


Intralogistics
Food Packaging
Commercial Kitchen