Side Sealing And Shrink Packager

Side Sealing And Shrink Packager

Product code AP 5545 TBC/M APTS 5030
Machine dimension L×W×H (mm)   1680 × 975 × 1500 1672 × 770 × 1560
Tunnel dimension L×W×H (mm) / 1300 × 500 × 300
Max packing size L(mm) H<150> Unlimited 400 × 250
Max packing size W+H (mm) ≤430 /
Cross sealing L(mm) 450 /
Packing speed(pcs/min) 20-40 0-15M
Air pressure (kg/cm2)  6-8 /
Power supply 3PH220V/380V50/60Hz
Power (kw)  1.8 12
Net weight (kg) 290 360
  • Vertical driver cross seal bar and advanced constant temperature side seal blade, straight and solid sealing line always at middle of product makes perfect sealing effect
  • Constant hot sealing system workable with POF and others standard shrink film
  • Simple hand wheel adjust packing size for different product dimension,easier operation but more reliable
  • Continuous side seal without product length limit
  • Most advanced PLC program controller equipped with safety and alarm devices, smooth and continuous side seal action without manual repeat job, very simple maintain operation
  • Photocells detection work with timer controls feeding and release film length accurately, make shrink effect easily controllable
  • Two switchover photocells horizontally and vertically, finish seal packaging easy for small or thinner product
  • Independent motor controls waste film rewind not loose and not too tight, easy take waste film out
  • Able to increase air blow function demands
  • Optional powered feeder and non powered storage table for requirements


Tell us about your business requirement, one of our technical expert will be in touch with you soon..!