SX 200 Bone saw
SX 200 Bone saw is a vertical Bone Saw Machine from Dadaux intended for accurate cutting of bone-in meat in Saudi butcher shops and processing rooms. It supports portioning of chilled and frozen products within defined dimensional limits. With a cutting capacity of 190 x 245 mm and blade speed of 15 m/s, it is suitable for routine meat fabrication tasks in KSA retail and factory environments.
In Saudi meat handling facilities, controlled splitting of bone sections is essential for portion accuracy and packaging efficiency. The SX 200 model addresses these operational requirements through a rigid stainless steel body and defined cutting parameters. It is commonly used in Riyadh and Jeddah preparation rooms where carcass portions are resized prior to retail display or further processing.
The machine accommodates products up to 190 mm in length and 245 mm in height. The 1640 x 16 mm blade runs at approximately 15 m/s, providing consistent cutting speed under moderate load. Automatic blade stretching maintains proper tension, reducing deviation during repetitive operations.
Electrical and motor assemblies are protected from water splash, supporting sanitation procedures typical in KSA meat facilities. The stable frame thickness minimizes vibration during cutting, allowing predictable operation in retail butcher shops and mid-scale processing units across Saudi Arabia.
Technical Specifications
| Product Code | SX200 | SX220 |
| Tension | 0,75 Kw | 1,1 Kw |
| Cutting capacity | L 190 x H 245 mm | L 200 x H 230 mm |
| Machine dimension | 489 x 571 x 874 mm | 508 x 638 x 922 mm |
| Blade dimensions | 1640 x 16 mm | 1740 x 16mm |
| Blade speed | 15 m/s | 17 m/s |
| Weight | 52Kg | 70kg |
Key Features
- Stainless steel 1810 construction
- Cutting capacity: 190 mm length x 245 mm height
- Blade size: 1640 x 16 mm
- Blade operating speed: 15 m/s
- Automatic blade stretcher mechanism
- Sliding upper blade guide system
- Water splash protection for motor and electrical parts
- Rigid structural frame design
- CE compliant configuration
SX 200 Bone saw
Brochure | Quotation | Availability
Fill the form with valid details to receive the information.
Product Videos
Frequently Asked Questions
The machine is suited for structured portioning in Riyadh butcheries and preparation rooms. With a defined cutting window of 190 x 245 mm, it processes bone-in sections used in retail and wholesale distribution without exceeding its operational capacity.
The reinforced stainless steel frame minimizes vibration during repetitive cutting. In Saudi facilities such as Jeddah processing centers, this stability supports predictable cut lines and reduces mechanical stress during continuous daily operation.
Regular inspection of blade tension, guide alignment, and motor housing is required. In Dammam and Khobar meat facilities operating extended shifts, maintenance teams typically verify blade condition and ensure no debris accumulates near moving assemblies.
The SX 200 can handle chilled and moderately frozen meat within its dimensional limits. For heavily frozen blocks, operators should confirm that product size does not exceed 190 mm length and 245 mm height to prevent excessive strain on the blade.
The motor and electrical components are protected against water splash. Installation should include proper grounding and circuit protection according to Saudi electrical standards, especially in high-moisture preparation rooms.
In Saudi production lines, the SX 200 is typically positioned after carcass breakdown and before trimming or packaging stations. It supports resizing tasks without requiring full industrial band saw systems used in large abattoirs.
Customer Testimonials
GET A QUOTE
Tell us about your business requirement, one of our technical expert will be in touch with you soon..!
NEW PRODUCTS ALERTS
