Auto Dual Filler with Online Weighing
The Auto Dual Filler with Online Weighing is a dual-auger powder filling machine designed for inline operations requiring precise weight control and higher output. It is used in Saudi manufacturing plants where container filling accuracy and throughput must be maintained simultaneously. The system supports 100–2,000 g fill weights and achieves speeds above 50 cans per minute, depending on product and container format.
In factories located around Riyadh and Dammam, the system is typically installed as part of a fully integrated can-packing line. Containers move through straight-line transfer, vibration settling, filling, weighing, and verification without manual intervention. The machine accommodates container sizes from 60 mm to 135 mm in diameter and heights up to 260 mm, making it suitable for standardized industrial packaging formats.
Saudi plants handling food ingredients, chemicals, or agricultural powders benefit from the system’s ability to correct weight deviation automatically. The rigid stainless steel frame and centralized control logic support continuous operation in demanding factory environments.
Technical Specifications
| Product Code | APDH-Q3-D |
| Dosing mode | Dual filler filling with online weighing |
| Filling weight | 100 - 2000g |
| Filling Accuracy | 100-500g, ≤±1g; ≥500g,≤±2g |
| Container Size | Φ60-135mm; H 60-260mm |
| Filling Speed | Above 50 cans/min(#502),Above 60 cans/min(#300 ~ #401) |
| Power supply | 3P AC208-415V 50/60Hz |
| Air Supply | 6kg/cm 0.2cbm/min |
| Total Power | 3.4 kw |
| Total Weight | 450kg |
| Overall Dimensions | 2650×1040×2300mm |
| Hopper Volume | 50L(Main) 25L (Assist) |
Key Features
- Dual filler system with online weighing feedback
- Main and assist augers for staged filling control
- Real-time weight tracing and automatic correction
- Inline straight-through container transfer design
- Servo-driven screws for consistent dosing accuracy
- Touch screen HMI with production monitoring
- Wide container size compatibility for industrial cans
- Enclosed stainless steel structure for factory use
Auto Dual Filler with Online Weighing
Brochure | Quotation | Availability
Fill the form with valid details to receive the information.
Frequently Asked Questions
Saudi manufacturing facilities often run high-volume lines where weight compliance is critical. Dual filler systems with online weighing allow continuous correction during filling, supporting stable output in large plants across Riyadh and Dammam without slowing the line.
The system is designed for continuous operation, with servo-controlled augers and load cells maintaining consistency over extended shifts. Saudi plants typically schedule calibration checks at shift changes to compensate for temperature or material density variations.
The machine supports rigid cans and containers within defined diameter and height ranges. Saudi factories often standardize container sizes for food powders and chemicals, especially in industrial zones such as Jubail and Khobar.
By correcting fill weight in real time, the system minimizes overfill and rework. This is important in Saudi plants processing costly ingredients, where even small weight deviations can lead to significant material loss across high daily volumes.
Typical measures include guarding around augers, enclosed weighing zones, and lockout procedures during cleaning. These practices align with safety standards followed in large Saudi industrial facilities handling continuous production lines.
Customer Testimonials
GET A QUOTE
Tell us about your business requirement, one of our technical expert will be in touch with you soon..!
NEW PRODUCTS ALERTS
