What types of bottles and jars can this blow molding machine produce?

The Bottle/Jar Blow Molding Machine is designed for PET containers used in beverages, food oils, and household liquids. It supports body diameters from 20–100 mm and heights up to 310 mm. In UAE factories around Dubai and Sharjah, it is commonly used for standard water, juice, and chemical bottles produced from preforms.

How does the machine perform under continuous shift operations?

The machine is built for stable multi-shift production, which is common in UAE manufacturing zones. With a capacity of roughly 1,800–2,000 bottles per hour (500 ml), it maintains consistent forming accuracy when supported by proper air supply, cooling water, and routine inspection during extended operating hours.

What infrastructure is required before installing this machine?

Installation typically requires a stable power source, high-pressure and low-pressure air compressors, cooling water supply, and sufficient floor clearance. In industrial warehouses and factories across the UAE, these utilities are usually centralized, allowing the machine to integrate smoothly without major facility modification.

Can this blow molding machine be linked with filling and labeling lines?

Yes, the machine is designed to feed directly into downstream filling, capping, and labeling systems. In UAE packaging lines, it is often positioned upstream of liquid filling machines, allowing manufacturers to control container quality internally before moving to labeling and secondary packaging stages.

What routine maintenance is required to keep output consistent?

Daily checks include mold surface inspection, air pressure stability, and cooling flow monitoring. Weekly tasks usually involve heater and clamp system checks. In GCC production environments, preventive maintenance is critical to avoid unplanned downtime caused by heat, dust, or compressed air inconsistencies.

Bottle/Jar Blow Molding Machine

The Bottle/Jar Blow Molding Machine is an automated container-forming unit used to manufacture plastic bottles and jars within industrial production lines. In Saudi Arabia, it is commonly installed in manufacturing plants supplying food, beverage, and chemical packaging sectors. The system supports production volumes of 1,800–2,000 containers per hour (500 ml) and manages bottle heights up to 310 mm, aligning well with continuous factory operations across KSA.

Product Details Technical Specifications Key Features Video Projects FAQs

1/1

This machine forms PET bottles and jars by reheating preforms and expanding them inside precision molds using regulated air pressure. It is designed for stable performance in high-duty production environments, including large-scale factories operating in Riyadh and Dammam.

The equipment accommodates container body diameters from 20–100 mm and neck finishes between 15–38 mm, allowing manufacturers to serve multiple packaging formats without frequent tooling changes. With two active cavities, the machine maintains consistent output while managing thermal and mechanical loads efficiently.

Its enclosed design supports safer operation and minimizes environmental interference, which is particularly important in high-throughput Saudi production facilities. The system integrates easily with filling, capping, and labeling equipment, supporting linear or U-shaped line layouts common in KSA industrial plants. For operations focused on internal container production, the machine delivers predictable cycle times and uniform bottle geometry.

Technical Specifications

Product Code	APF-GA2
Productivity	1800-2000 bottles/hr(500ml)
Body diameter	20-100mm
Height	50-310mm
Neck diameter	15-38mm
Cavity	2cavities
Mold thick	240mm
Mold	260240370mm
Electrical source power	380v 3Phase /220v 3Phase
Rated Power	25kw
Really use power	6.5kw
LP air compressor	1.0m3/min 1.0MPa 1set (15KW)
HP air compressor	0.7m3/min 3.0MPa 2sets
Air dryer	1.0m3/min 3.0MPa 1set
Cooling water	15L/min
Dimension (LWH)	190012801930mm
Weight	2200kg
Auxiliary equipment (LWH)	20009502480mm
Auxiliary equipment Weight	250kg

Key Features

Dual-cavity forming system for balanced output
Production capacity up to 2,000 bottles per hour (500 ml)
Supports bottle heights from 50–310 mm
Accepts body diameters between 20–100 mm
Compatible with standard PET preforms
Integrated air and cooling system compatibility
Enclosed operating structure for factory safety
Mold dimensions suitable for varied bottle profiles

Bottle/Jar Blow Molding Machine
Brochure | Quotation | Availability

Fill the form with valid details to receive the information.

Call: +966 56 149 3601

WhatsApp: +966 56 149 3601

Email: [email protected]

Frequently Asked Questions

Is this machine suitable for high-volume Saudi manufacturing plants?

The Bottle/Jar Blow Molding Machine is well-suited for medium to high-volume factories in Saudi Arabia. With an output of up to 2,000 bottles per hour, it supports continuous production commonly required in food, beverage, and chemical plants operating in industrial hubs like Riyadh and Dammam.

How flexible is the machine when changing bottle formats?

The system allows format changes by adjusting molds and settings for different diameters and heights. In Saudi factories handling multiple SKUs, this flexibility helps reduce reliance on external bottle suppliers while maintaining control over neck finish, body shape, and overall container dimensions.

What operating conditions are important for stable performance?

Stable compressed air pressure, consistent cooling water flow, and controlled ambient temperature are critical. In KSA production environments, especially in warm regions, maintaining proper ventilation and air drying helps ensure repeatable bottle forming and avoids deformation during high-speed cycles.

How does this machine support production line efficiency?

By producing bottles in-house, the machine reduces dependency on external logistics and storage. In Saudi industrial facilities, it is often synchronized with filling lines to minimize buffer inventory, improve line balance, and reduce handling time between container production and filling.

What safety measures should operators follow?

Operators should follow lockout procedures during mold changes, monitor air pressure systems, and keep safety doors closed during operation. In Saudi factories with high-throughput lines, adherence to standard safety protocols helps prevent injuries related to heat, moving clamps, and compressed air systems.