1.5T Mini Electric Forklift

The 1.5T Mini Electric Forklift is a small-frame electric lifting truck built for structured material movement inside factories and storage facilities. It supports pallet handling, internal transfers, and racking operations commonly found in Saudi warehouses and production units. With a working load rating of 1,500 kg and an aisle operating width close to 3.0 meters, it fits distribution centers in Riyadh, Dammam, and nearby industrial zones where controlled maneuvering is required.



This electric forklift is intended for repetitive handling cycles in enclosed industrial environments. It is typically deployed in spare-parts stores, packaging lines, assembly halls, and logistics warehouses where compact movement and predictable lifting behavior are required.

The truck accommodates ground-level pallet pickup and vertical placement up to 3,000 mm, while maintaining controlled residual capacity at extended heights. A 600 mm free lift supports operation under mezzanines and door frames, reducing unnecessary mast extension during internal movement. The 5,180 mm maximum mast extension allows higher rack access when required.

With a narrow chassis width of 1,010 mm and a standard 1,220 mm fork set, the forklift integrates well into racking layouts used across KSA industrial facilities. Hydraulic lever controls provide direct mechanical feedback, enabling operators to manage loads accurately. Electric operation aligns with indoor safety policies and structured warehouse practices common in Riyadh and Eastern Province logistics clusters.

Technical Specifications


Product Code ALTKA1545
Basic capacity 1500 kg @ 500mm Load Center up to 3000 mm height
Residual capacity 600 kg @ 500mm Load Center at 4500 mm height
Free Lift 600mm
Extended Mast Height 5180mm
Fork length 1220mm
Overall width of the truck 1010mm
Aisle width require 2960mm
Operation Control Hydraulic leaver Type

Key Features


  • Rated lifting capacity of 1.5 tons at standard load center
  • Residual load capacity of 600 kg at higher mast elevations
  • 600 mm free lift for operation in low-clearance zones
  • Maximum mast extension up to 5,180 mm
  • Compact chassis design suitable for organized racking layouts
  • Hydraulic lever-controlled lifting and tilting functions
  • Electric traction system designed for indoor warehouse use
  • Standard fork length of 1,220 mm

Equipped with:


  • LED Head Light
  • Reverse alarm
  • Suspension adjustable seat
  • Beacon Light
  • Load Back Rest
  • Auto battery water-filling system
  • OPS-Operator presence system
1.5T Mini Electric Forklift
Brochure | Quotation | Availability

Fill the form with valid details to receive the information.

8 + 6 =

Product Videos


Frequently Asked Questions


In Saudi Arabia, it is widely used inside factories and logistics hubs in Riyadh and Dammam for component movement, pallet staging, and internal transfers. Its electric drive suits enclosed production halls where exhaust control and noise reduction are required.

For structured indoor shifts, the forklift performs reliably when battery charging cycles are planned correctly. Many KSA facilities operate it in single or split shifts, using scheduled charging during breaks to maintain consistent availability without overstressing electrical components.

The forklift supports steady pallet movement rather than high-speed throughput. It is well suited for organized racking operations where accuracy and repeatability are more important than travel speed, such as spare-parts warehouses and controlled distribution centers.

Operators should ensure proper load centering, controlled lift speeds, and clear aisle markings. In Saudi facilities with mixed pedestrian traffic, electric forklifts are preferred due to lower noise, allowing better awareness and reduced indoor risk.

Yes. It is designed for smooth concrete floors typically found in Saudi factories and logistics hubs. Floor condition should be even and well maintained to ensure stable lifting, especially when handling loads at higher mast elevations.

The compact chassis and standard fork dimensions align with selective and adjustable pallet racking systems commonly used in Riyadh and Eastern Province warehouses, allowing efficient rack access without aisle redesign.

Customer Testimonials

GET A QUOTE


Tell us about your business requirement, one of our technical expert will be in touch with you soon..!

PROCEED

NEW PRODUCTS ALERTS


Intralogistics
Food Packaging
Commercial Kitchen