What types of liquid products can this production line handle in UAE facilities?

The line is designed for free-flowing and semi-viscous liquids such as sauces, oils, syrups, beverages, and cleaning liquids. In UAE factories, especially around Dubai and Sharjah, it is commonly used where consistent dosing and leak-free sealing are required for retail or bulk distribution formats.

How does the system maintain filling accuracy during continuous operation?

Filling accuracy is controlled through programmable liquid dosing units managed by the PLC. Flow rate, fill time, and cut-off timing are calibrated based on product behavior. This setup allows stable operation during long production runs typical in UAE industrial environments.

Can the production line integrate with existing tanks or mixing systems?

Yes. The line is designed to connect directly with upstream liquid tanks, pumps, or mixers. Many UAE users integrate it into existing processing layouts without major structural changes, allowing smooth product transfer and synchronized filling cycles.

What safety measures are included to prevent product loss or spillage?

The system includes pouch detection sensors and logic that prevent filling or sealing if a bag is not opened correctly. This helps avoid spills, reduces wastage, and protects operators—an important consideration in high-throughput UAE packaging operations.

What routine maintenance is required in warehouse or factory settings?

Routine maintenance mainly involves cleaning liquid contact parts, checking seals, and inspecting pneumatic components. In UAE climates, regular inspection of hoses and fittings is recommended to ensure consistent performance during continuous shifts.

Liquid Measure-Fill-Seal Production Line For Preformed Plastic Bags

The Liquid Measure Fill Seal Production Line is a fully automated system used for accurate liquid dosing and sealing into pre-made plastic bags. It is widely applied in Saudi Arabia’s food, chemical, and industrial packaging sectors. The line supports controlled filling for both thin and viscous liquids while maintaining consistent pouch sealing. Standard configurations allow outputs up to 45 bags per minute and accommodate a wide filling range suited to bulk and retail packaging formats used across KSA factories.

Product Details Technical Specifications Key Features Video FAQs

1/1

Liquid Measure-Fill-Seal Production Line For Preformed Plastic Bags 1 KSA

This system is designed to automate liquid packaging with minimal operator involvement. It manages pouch handling, liquid measurement, sealing, and discharge within a single integrated frame. Liquid dosing is controlled through programmable filling units that regulate flow rate and volume according to product behavior.

In manufacturing facilities around Riyadh and Dammam, the line is typically installed in continuous production environments where consistency and uptime are critical. It connects easily to liquid supply tanks and can be synchronized with upstream mixing or heating processes. The sealing unit applies uniform pressure and temperature to ensure leak-resistant closures on each pouch.

Non-power specifications commonly include filling capacities from small sachets up to multi-kilogram packs and cycle rates adjusted based on pouch size and liquid viscosity. Safety interlocks and fault alarms help protect operators and reduce downtime. The system is suitable for long production shifts common in large-scale Saudi processing plants.

Technical Specifications

Product Code	APR6-200, APR8-200	APR6-300, APR8-300	APR8-350
Eqipment Material	304 Stainless steel.
Pneumatic Component	SMC,AirTAC
Vacuum Component	Vacuum Generator(SMC)
Drive Mode	Frequency Converison, motor drive		Servo motor drive
Operation Interface	Touch Screen Language: English
Bag Materals	Heat Sealable film as PA/PE,PET/PE,AL film etc.
Bag sizes (mm)	W:70-200 L:100-300(date coding requires 140 length)	ARZ6-300: W:160-270 L:100-400ARZ8-300: W:160-300 L:100-400	W:165-450 L:200-450
Filling Range (gm)	5-1500	5-4000	5-2500
Packing speed (bags/min)	20-45(depended on the prouct and filling weight)	10-40(depended on the prouct and filling weight)	20-25(depended on the prouct and filling weight)
Package accuracy	Error>±1%		-
Weight (Kg)	ARZ6-200: 800 ARZ8-200: 1000	ARZ6-300: 1500 ARZ8-300: 2000	1200
Dimension LxWxH (mm)	ARZ6-200: 1475 X 1325 X 1480ARZ8-200: 1635 X 1455 X 1480	ARZ6-300: 1585 X 1545 X 1600ARZ8-300: 1645 X 1645 X 1640	1804 X 1506 X 1800
Total Power (Kw)	ARZ6-200: 1.5 ARZ6-200: 2.3	4
Driving Power Source	380V Three-Phase Five-line 50Hz
Control Power Source	DC24V
Compress Air requirement	>0.45 m /min		>1.2 m /min

WEIGHER

Product Code	AMHW-10H	AMHW-14H	AP3B101	ASVFA1-100P
Type	Weigher	Weigher	Auger	Auger
Filling Range (gm)	10 ~2,000 gm	10 ~ 5,000 gm	10 ~ 2,000 gm	100 ~ 1,000 ml
Accuracy (gm)	±0.5-1 gm	±0.1 ~ 2 gm	±0.1 ~ 2 gm	±0.1 ~ 2 gm
Max. speed (Drops per min)	70	120	12 ~ 40	10 ~ 30WPM
Power supply	220V, 50Hz, 1.5KW	220V, 50 Hz, 2 KW	3P/220V-4150/ 50/60Hz 1.9KW	-
Hopper volume (L)	2.4	1.3	50	-
Monitor	-	7"	-	-

Key Features

Automated pouch pick, fill, and seal workflow
Accurate liquid dosing through controlled filling units
Production speed adjustable by pouch size and viscosity
Compatible with laminated and heat-sealable bag materials
PLC and HMI interface for recipe management
Fail-safe pouch opening detection logic
Hygienic stainless steel construction in wet zones
Designed for continuous industrial operation

Liquid Measure-Fill-Seal Production Line For Preformed Plastic Bags
Brochure | Quotation | Availability

Fill the form with valid details to receive the information.

Call: +966 56 149 3601

WhatsApp: +966 56 149 3601

Email: [email protected]

Frequently Asked Questions

Is this production line suitable for large-scale liquid packaging plants in Saudi Arabia?

Yes. The system is built for continuous operation and is commonly deployed in large Saudi factories where high output and consistency are required. Facilities in Riyadh and Dammam use it for multi-shift production with minimal operator intervention.

How does pouch size or liquid viscosity affect production speed?

Production speed varies based on pouch dimensions, liquid thickness, and fill volume. Thicker liquids or larger pouches require longer fill times. The PLC allows operators to adjust cycle parameters to balance speed and accuracy in KSA production lines.