What types of food operations commonly use a 2 Sides Film Cut Manual Tray Sealer in the UAE?

This machine is widely used in catering kitchens, chilled food prep units, and small processing facilities across Dubai and Sharjah. It suits operations handling ready meals, cut vegetables, meat portions, and bakery items where manual control, limited space, and consistent sealing are more important than full automation.

How does the two-side film cutting system affect finishing quality?

The built-in cutter trims film on two fixed sides after sealing, reducing excess material. The remaining edges depend on film width selection and may require manual trimming. In UAE food facilities, operators usually adjust film width during setup to minimize secondary cutting and maintain clean pack presentation.

What tray sizes and depths can be handled in daily operation?

The sealer supports trays within the maximum mould footprint, with sealing depths up to 110 mm. A single mould can handle different tray heights if length and width remain unchanged, which is useful for UAE kitchens packing multiple portion sizes using the same tray format.

How does this machine fit into existing packing workflows?

It is typically positioned after manual filling and before secondary packing or labeling. In compact UAE food operations, it works as a standalone station without conveyors, allowing operators to control sealing pace while maintaining alignment with upstream preparation activities.

What routine maintenance is expected under UAE operating conditions?

Maintenance mainly involves cleaning the sealing plate, checking heater elements, and inspecting cutting blades. In warm GCC environments, regular surface cleaning and temperature checks help maintain seal consistency and prevent residue buildup during extended daily operation.

2 Sides Film Cut Manual Tray Sealer

The 2 Sides Film Cut Manual Tray Sealer is a manual tray sealing machine built for small to mid-volume food packaging operations that require dependable sealing control. It is typically installed in production rooms, preparation zones, and secondary packing areas where flexibility matters more than automation. With an average throughput of 450 trays per hour and a maximum sealing depth of 110 mm, it supports a wide range of tray profiles. This equipment is widely used across Saudi Arabia’s food production and distribution sector.

Product Details Technical Specifications Key Features FAQs

1/1

2 Sides Film Cut Manual Tray Sealer 1 KSA

Designed for precision sealing rather than continuous flow production, the 2 Sides Film Cut Manual Tray Sealer uses a heat-based sealing plate activated through manual operation. It suits processing environments such as ready-meal kitchens, bakery prep units, and food packing rooms in Riyadh and Jeddah, where product changeovers are frequent and tray formats vary.

The machine supports sealing temperatures from ambient up to 240°C, allowing operators to match sealing parameters with different tray and film combinations. It achieves a practical sealing rate of around 450 trays per hour, depending on operator rhythm and tray size. Mould interchangeability is supported as long as trays fall within the machine’s maximum mould footprint, and a single mould can process trays of different heights up to 110 mm.

Film cutting is performed on two fixed sides after sealing. The remaining edges may require manual trimming unless film width is optimized during setup. This unit is commonly positioned after manual filling stations and before secondary packing, making it suitable for Saudi production lines that prioritize flexibility over speed.

Technical Specifications

Product Code	AHTS-175	AHTS-225
Output (Trays/h)	450	450
Sealing Temperature	0～240℃	0～240℃
Voltage	220V/50HZ	220V/50HZ
Power(KW)	500	500
Weight(kg)	7	8.7
External Dimension(mm)	380×175×210	440×208×215
Max. mould size L×W	195×136	226×166
Sealing Depth (mm)	H≤110	H≤110

Key Features

Manual tray sealing with heat-based sealing plate
Two-side fixed film cutting mechanism
Average output of approximately 450 trays per hour
Supports tray heights up to 110 mm
Interchangeable moulds within size constraints
Wide sealing temperature range up to 240°C
Compatible with low and high barrier sealing films
Suitable for standalone food packing stations

Note:

Manual tray sealing for controlled batch operation
Two-side film cutting integrated after sealing
Output capacity up to 450 trays per hour
Supports tray heights up to 110 mm
Interchangeable moulds within machine size limits
Sealing temperature adjustable up to 240 °C
Compatible with PE, PET, PVC, and laminated films
Compact design suitable for limited packing space

2 Sides Film Cut Manual Tray Sealer
Brochure | Quotation | Availability

Fill the form with valid details to receive the information.

Call: +966 56 149 3601

WhatsApp: +966 56 149 3601

Email: [email protected]

Frequently Asked Questions

Is the 2 Sides Film Cut Manual Tray Sealer suitable for continuous factory use in Saudi Arabia?

This model is best suited for controlled batch production rather than continuous high-speed lines. It is commonly used in food prep zones and secondary packing areas in Riyadh and Jeddah, where operators manage moderate volumes and frequent tray format changes.

What sealing output can realistically be achieved during normal shifts?

Under stable conditions, the machine can achieve around 450 trays per hour. Actual output depends on tray size, operator handling speed, and film setup. In Saudi facilities, consistent staffing and standardized trays help maintain predictable throughput across shifts.

How flexible is the machine when switching between tray formats?

Moulds are interchangeable as long as tray dimensions fall within the machine’s maximum mould size. A single mould can support trays of varying heights up to 110 mm, which helps Saudi processors reduce downtime when packing similar products in different portion depths.

What film materials work best with this tray sealer?

The machine works with PE, PET, PVC, and composite films. Low-barrier films are typically used for fruits and vegetables, while high-barrier PET-based laminates are preferred for meat and cooked foods in Saudi production environments requiring stronger seals.

What safety considerations should operators follow?

Operators should avoid contact with heated sealing surfaces and ensure stable tray placement before sealing. In Saudi facilities, basic training on temperature adjustment and blade awareness is usually sufficient to maintain safe operation without complex guarding systems.