Where is the Stealth Vertex Metal Detector typically installed in UAE packaging lines?

In UAE facilities, the Stealth Vertex Metal Detector is usually installed between a multihead weigher and a vertical form fill seal machine. In factories around Dubai and Sharjah, this placement allows inspection of free-falling products without extending conveyor length, which is useful in compact packaging halls and warehouse-linked production areas.

What types of products are best suited for free-fall inspection?

The system is commonly used for snack foods, grains, powders, nuts, and similar materials that move consistently under gravity. UAE processors handling dry or semi-dry products prefer this setup because it avoids belt contact and supports stable inspection in high-speed bagging environments.

How does the detector interact with the bagging machine during a reject event?

When metal is detected, the unit sends a signal through a reject relay. In most UAE installations, this stops bag sealing or diverts the affected product portion, preventing contaminated packs from being completed and reducing downstream handling issues.

Is the Stealth Vertex suitable for high-throughput packaging operations?

Yes, provided the product flow is stable. Throughput is governed by drop speed, chute diameter, and product density rather than belt speed. Many GCC facilities operate the detector reliably at the same rates as their multihead weighers.

What routine checks are required to keep the system reliable?

Routine checks usually include scheduled test routines, inspection of the chute area, and verification of reject signals. In UAE plants, quality teams often include these checks in HACCP verification schedules rather than performing manual tests during every shift.

Stealth Vertex Metal Detector

The Stealth Vertex Metal Detector is a compact food inspection solution designed for products moving in free-fall during packaging. It is commonly used in Omani processing and packing facilities where vertical form fill seal machines are employed. The system supports contamination control in gravity-fed applications without increasing line length. Standard configurations are suited to defined chute openings and continuous drop flow commonly used in Oman’s food production sector.

Product Details Key Features FAQs

1/1

The Stealth Vertex Metal Detector is used where products pass directly from weighing equipment into packaging via a vertical drop. It inspects the falling product stream and signals the packaging system to reject or stop when metal is detected. This approach avoids the need for conveyors and is well suited to dry goods and granular products.

In facilities around Muscat and Sohar, the detector is installed within compact packaging frames where space is limited. Performance is influenced by chute diameter, product speed through the sensing area, and material consistency. The remote control enclosure allows routine checks and adjustments without interrupting production flow or accessing elevated structures.

The system is designed for reliable operation in dry processing environments and supports routine cleaning without complex disassembly. Logged inspection data can be reviewed by quality teams to verify system performance. In Omani operations, the Stealth Vertex Metal Detector is often positioned as a final inspection step before sealed packs move to storage or regional distribution.

Halo Automatic Testing System for Metal Detectors

Halo system is an automatic metal detector testing device, designed to automatically test ferrous, non-ferrous and stainless steel samples on all Fortress metal detectors. Automatic testing saves time, money, labor, along with removing the risk of human error and work place injury at critical control points on a manufacturing line while complying with industry standards. The Halo system is ideal for applications where manual testing of a metal detector is made difficult due to access, position, access to the product flow, environmental conditions, etc.

Halo is suitable for any Fortress metal detector; ideally added at the point of manufacture, it can however, be added to some existing systems.

BROCHURE

Halo Automatic Testing System Key Features:

Saves Time and Money
Automatic, Accurate and Consistent Testing at Programmable Intervals
Decreases Frequency of Manual Testing
Reproduces Ferrous, Non-Ferrous and Stainless Steel metal sample signal
Detector Testing at a button push
Test speed with Halo set to match belt speed in conveyor applications
Front, Middle, and Back of Product Testing with Conveyor Applications
Externally Operated System
Multiple Custom Test Levels
Eliminates Workplace Safety Risks
Reduces Machine Downtime/Testing Time
Negates Human Error
System Set-Up in Minutes
Tamper Proof
Detailed Data Collection and Reports with Contact Reporter Software are Compliant with HACCP & GFSI Requirements

Key Features

Free-fall inspection design for vertical packaging lines
Minimal footprint for space-constrained installations
Remote control box for operational convenience
Digital signal processing for consistent detection
Detection of common metal contaminants
Automatic calibration and diagnostic checks
Reject relay integration with VFFS machines
Inspection data logging for quality review
Support for automated testing using Halo system

Stealth Vertex Metal Detector
Brochure | Quotation | Availability

Fill the form with valid details to receive the information.

Call: +968 9292 7321

WhatsApp: +968 9332 7778

Email: [email protected]

Frequently Asked Questions

What role does the Stealth Vertex Metal Detector play in Omani packaging workflows?

In Oman, the detector is commonly used as an inline inspection point within vertical bagging systems. Facilities in Muscat and Sohar rely on it to check free-falling products before sealing, helping ensure contaminated material does not enter finished packs.