Table-Top Food Wrapping Machine

The Table-Top Food Wrapping Machine is a small-format tray wrapping solution used to seal food items with stretch film in preparation and packing areas. It is applied in food processing rooms, retail back-of-house operations, and regional distribution setups. The system supports clean wrapping for individual portions and tray-based items, operating at up to 15 packs per minute and handling 100 g to 2 kg products. It is suitable for food handling environments across Oman where space efficiency and reliable wrapping are required.



The ATCOPACK Table-Top Food Wrapping Machine is designed for controlled food packing tasks that require consistent film tension and base sealing. The machine wraps products securely, sealing the underside to limit contamination during storage or short-distance distribution. Its compact dimensions allow placement on counters or worktables without structural modification.

In operations around Muscat and Sohar, the unit is commonly used in grocery preparation rooms, catering kitchens, and food service hubs. Products are wrapped individually, maintaining product visibility while supporting freshness during chilled or ambient holding. The system supports specific product dimension ranges and requires correct film width selection to achieve uniform wrapping results.

The stainless-steel construction resists corrosion in humid conditions, while the mechanical layout simplifies cleaning and daily maintenance. Operating within standard indoor temperature ranges, the machine supports consistent output without complex controls. This makes it suitable for Omani food businesses handling steady, small-batch packing volumes.

Technical Specifications


Product Code AFWM-T15
Speed 15 packs per min
Packing size L80—280mm * W90—200mm * H10—150mm
L+(Hx2)≤390mm; W+H≤200mm
Maximum size combination not possible.
The maximum size is not suitable for group packaging as well. You need to use the appropriate film that fits the size of the product.
When the product fits into the packaging range but the width of the film is not enough, it cannot be wrapped.
Product weight 100g-2kg
Width of cling film 250-450mm
Material of film PE/ PVC
Max. Dia. of film ≤160mm
Operating humidity 10-90%RH(Condensation-free)
Working Temperature 5℃~35℃
Power supply 220V / 50HZ, 550W
Net weight 70kg
Machine size after packaging/ Gross weight L800*W750*H900mm,90kg

Applications


Key Features


  • Table-mounted design for compact packing setups
  • Supports individual and tray-based food items
  • Up to 15 packs per minute output capacity
  • Compatible with PE and PVC stretch films
  • Controlled sealing to reduce film loosening
  • Stainless steel body for moisture-prone areas
  • Defined product size handling limits
  • Simple mechanical operation for daily use

Advantages


  • The machine is small, the overall size is L668 * W730 * H752mm, and can be placed on the table
  • The machine can pack products with or without tray, compatible with PE or PVC film
  • The fastest speed of the machine is up to 15 packs / min
  • The whole machine is made of stainless steel 304, anti-corrosion and moisture-proof
  • The bottom of the packaged product shall be sealed tightly to avoid water contamination and film loose during transportation
  • The machine can be operated when it is powered on, which is easy to use
  • It can be used for soft packaging products, such as bread, tofu, etc

Note:


  • 1. Calculating formula for film width: Product Length + (Product Height x2) + 60 mm.
    Standard film specifications: Width 350mm/400mm/450mm/500mm/550mm. For this machine, Film Width must be ≤450mm).
    For example: if the calculation is 360 mm, then choose a 400 mm wide film
  • 2. Product shape limitation.
    A. For round products, you can wrap a single one (size must be within the range), two or more cannot be wrapped.
    B. For strip-shaped products, you can wrap single (size must be within the range), two or more without tray cannot be wrapped.
    C. For square products or products with a tray, the size should be within the range and formula.
Table-Top Food Wrapping Machine
Brochure | Quotation | Availability

Fill the form with valid details to receive the information.

3 + 2 =

Product Videos


Frequently Asked Questions


The machine is used to wrap food items before short-distance distribution or retail display. In Muscat and Sohar, it is commonly installed in food preparation rooms, catering kitchens, and regional packing centers handling fresh or chilled products.

Yes. The system supports wrapping products with trays as well as certain loose items, provided size limits are respected. Tray use generally improves wrap stability, especially for soft or irregular food products.

The stainless steel construction resists corrosion and supports operation in humid conditions when used indoors. Regular cleaning and dry storage of film rolls help maintain consistent wrapping quality in coastal Omani environments.

The machine is ideal for small to medium batch operations rather than high-speed production lines. It supports steady output without requiring complex automation, making it suitable for regional food businesses and catering operations.

Yes. Film width must be calculated based on product length and height to ensure proper sealing. Using undersized film can lead to incomplete wrapping, while oversized film may reduce efficiency and increase material usage.

Operators should periodically verify seal tightness, film alignment, and cleanliness of contact surfaces. These checks help maintain consistent pack quality and reduce downtime during daily food wrapping tasks.

Customer Testimonials

GET A QUOTE


Tell us about your business requirement, one of our technical expert will be in touch with you soon..!

PROCEED

NEW PRODUCTS ALERTS


Intralogistics
Food Packaging
Commercial Kitchen