REEFORM E5 Thermoforming Machine
The REEFORM E5 Thermoforming Machine is a compact thermoforming MAP system used in Omani food processing and export packaging operations. It is suitable for factories, cold rooms, and packing units supplying domestic and regional markets. The machine supports thermoforming depths up to 80 mm and operates at 4–8 cycles per minute, allowing consistent tray production with controlled energy and maintenance requirements.
In processing areas such as Muscat and Sohar, the machine is commonly installed in compact facilities where equipment must be reliable, quiet, and easy to clean. The open stainless-steel frame simplifies wash-down procedures and allows operators to access all processing stations without extended downtime.
The system supports bottom film widths up to 420 mm, cut-off lengths between 200 and 300 mm, and a maximum forming depth of 80 mm. A 4–8 cycle per minute operating range suits moderate-volume production without sacrificing pack consistency.
Processing movements are electrically driven, reducing mechanical complexity and air consumption. Only forming and sealing functions rely on compressed air, supporting stable operation in facilities where utilities must be tightly managed. This configuration aligns well with Omani production environments focused on reliability and long service life.
Technical Specifications
| Product Code | REEFORM E5 |
| Machine length: | 3620 mm |
| Machine width | 1010 mm |
| Machine height | 1700 mm |
| Cut-off length | 200 - 240- 270- 300 mm |
| Bottom film | 320 mm - 360 mm - 420 mm |
| Product Loading area | 600-720-810-600 mm |
| Free position | 3-3-3-2 |
| Thermoforming depth | Max. 80 mm |
| Machine cycle | From 4 to 8 Cycles / min. |
| Air pressure | 6 - 10 bar (600-1200 Nl / min.) |
| Power supply | 8 - 18 Kw |
| Water consumption | 50 - 80 L / h - 1,5 - 2,5 bar (18 - 22°C) |
| Weight | 1000 - 1200 Kg |
Key Features
- Compact thermoforming machine for moderate output facilities
- Maximum forming depth of 80 mm for tray applications
- Bottom film compatibility up to 420 mm width
- Adjustable cut-off lengths from 200 to 300 mm
- Electric-driven processing stations for reduced wear
- Minimal compressed air use limited to forming and sealing
- Stainless-steel structure suitable for wash-down areas
- Low-noise operation for enclosed processing rooms
- Simple control interface for format adjustments
REEFORM E5 Thermoforming Machine
Brochure | Quotation | Availability
Fill the form with valid details to receive the information.
Frequently Asked Questions
In Oman, the REEFORM E5 is commonly used in meat processing, cheese packing, and chilled food preparation units. Facilities in Muscat and Sohar favor it for products that require controlled atmosphere sealing without large-scale automation complexity.
The E5 supports bottom film widths up to 420 mm and forming depths up to 80 mm. This range allows Omani processors to run shallow and medium-depth trays using flexible or rigid films without extensive mechanical reconfiguration.
Yes. With cycle rates between 4 and 8 cycles per minute, the machine fits operations that prioritize pack quality and shelf-life consistency over high-speed output. This aligns well with regional production volumes in Oman.
Routine inspection, cleaning, and scheduled seal checks are the primary maintenance tasks. The open-frame layout simplifies access in industrial environments such as Sohar, where dust control and regular sanitation are part of daily operations.
The linear design and defined loading area allow the E5 to be installed without major layout changes. Many Omani facilities integrate it alongside manual inspection or labeling stations, keeping workflows simple and controlled.
Customer Testimonials
GET A QUOTE
Tell us about your business requirement, one of our technical expert will be in touch with you soon..!
NEW PRODUCTS ALERTS
