Automatic tray sealer TWIN DIE_SET
suitable for High-performance in Industrial use
Multi line tray loading conveyor from 1 to 4 tracks. Tray transport driven by pushing rods guided on both side by chain, double movement or step by step gentle and controlled until the defined die-set position.
Driven motors and electrical die-set up and down motion suitable for a fast and efficient pack output.
Machine can be equipped with various modules and to be expanded into automatic lines.
The main features:
- Increased performances overall and optimization of synchronization with other equipment
- An Excellent Hygienic Design thanks to the completely new housing together both the inclined surface never in contact with each other for fast liquids’ evacuation and the reduction of the external screws
- Total interchangeability of the existing die sets and equipment with previous series
- A performance of 17 cycles per minute* (only with sealing) thanks to the fully electric leverage system
- A performance of 10-12 cycles per minute* ( with MAP configuration) when equipped with a either 200 or 300 m3/h vacuum pump and a gas system
Machine need a little of air pressure so that a good saving in energy and in the general maintenance give a good return of the investment.
||6350 ÷ 7165mm
|Free Loading area for tray
||3000 ÷ 4000 mm
|Free loading position
|Height of loading conveyor
||915 - 960 mm
|Double Chamber Movement
||100 - 200 - 300 m3/ h
||3 / N / PE AC 400 V 50 Hz
||Up to 14 Kw
||8 Nl / c.
- REENEXT SOFTWARE
- AIR FREE
- WATER FREE
- NOISE FREE
- STAINLESS STEEL
- USER FRIENDLY
- ECO LINE
- VOLTAGE AND LINKS
- Different electrical supply
- Control and link to external equipment
- Connection for centralized vacuum system
- Photocell for printed film
- Liquid filter and powder
- Support for film printing device
- Special carrier rods for tray