Capping Machines (Economy Series)
Economy Series Capping Machines are mechanically driven capping systems designed for consistent closure of screw caps and spray caps on bottles used in cosmetic and personal care production. These machines are typically installed in factories and packaging lines across the UAE and wider GCC region where stable output and controlled torque are required without complex automation. The equipment supports bottle volumes in the range of 100 to 1000 ml and operates at production speeds of approximately 3,000 to 5,000 bottles per hour, depending on cap type and line configuration.
In UAE production environments such as Dubai and Sharjah, these machines are commonly used in cosmetic filling lines handling lotions, shampoos, perfumes, and liquid hygiene products. The equipment integrates easily with upstream filling machines and downstream labeling or inspection units, allowing smooth workflow continuity within compact factory layouts.
The machines typically accommodate bottle sizes between 100 and 1000 ml and deliver consistent capping yields of 99 percent or higher under normal operating conditions. Noise levels remain controlled, generally below 70 dB, which supports indoor manufacturing use. With overall dimensions around 2000 × 1100 × 2600 mm, the system fits well into existing UAE packaging lines while maintaining stable operation during multi-shift production cycles.
Technical Specifications
| Model | AXF-102 |
| Applied bottle range | 100-1000ml |
| Applied cap size | Customized, for different size, need to change cap vibrator and feeding tunnel |
| Yield of capping | >=99% |
| Power Supply | 220V 50HZ |
| Power Consumption | <=2KW |
| Pressure | 0.4-0.6Mpa |
| Speed Control | Frequency Convertion |
| Single machine noise | <=70Db |
| Weight | About 850kg |
| Dimension(LxWxH) | 2000x1100x2600(mm) |
| Production Capacity | 3000-5000 bottles/h |
Automatic Single Head Screw Capping Machine
Applied bottle range: 100-1000ml (Customization Available)Applied cap size: 20-120mm (Customization Available)
Collaring & Crimping Machine
The Collaring & Crimping Machine For Perfume Bottle is a kind of clamping type cap closing machine. It is suitable for cap closing of spray type caps. The machine uses the clamp to close the cap and fasten it on the edge of bottle mouth. The whole machine is composed of the machine body, table surface, clamping device and pneumatic control system
Key Features
- Mechanical or pneumatic capping mechanism for controlled closure
- Compatible with screw caps and spray-type caps
- Cap feeding system with adjustable vibratory orientation
- Production capacity ranging from 3,000 to 5,000 bottles per hour
- Applicable bottle volume range from 100 to 1000 ml
- Frequency-controlled speed adjustment
- Low operating noise suitable for indoor factory environments
- Designed for integration with filling and labeling equipment
Capping Machines (Economy Series)
Brochure | Quotation | Availability
Fill the form with valid details to receive the information.
Frequently Asked Questions
In the UAE, these machines are commonly used in cosmetic and personal care production lines handling shampoos, lotions, perfumes, and liquid hygiene products. Facilities in Dubai and Sharjah often use them in medium-speed lines where stable cap tightening and predictable output are required without complex automation.
The straight-line layout allows direct alignment with automatic fillers and downstream labeling machines. In UAE factories, this reduces conveyor modifications and simplifies line synchronization, especially in compact production areas where space efficiency and workflow continuity are important.
Under normal conditions, the machines operate between 3,000 and 5,000 bottles per hour. Actual output depends on cap type, bottle stability, and operator settings. UAE plants often run slightly below maximum speed to maintain consistency across long shifts.
Stable electrical supply, clean compressed air within the recommended pressure range, and level flooring are essential. In UAE industrial environments, maintaining clean cap feeders and avoiding dust buildup helps ensure smooth capping performance throughout the production day.
Routine tasks include cleaning the cap feeding system, inspecting clamping components, and checking pneumatic connections. UAE operators usually perform daily visual checks and scheduled lubrication to prevent uneven torque or cap misalignment.
Yes. Their stable operation, moderate footprint, and compatibility with standard bottle formats make them suitable for UAE facilities supplying products across the GCC, Middle East, and parts of Africa where consistent sealing is required for transport.
We Supply To
Product Tags
Customer Testimonials
GET A QUOTE
Tell us about your business requirement, one of our technical expert will be in touch with you soon..!
NEW PRODUCTS ALERTS
